5420
[User Auth]
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been enabled.
041 Printer *CTL
Determines whether certification is required
before a user can use the printer applications.
[0 or 1 / 0 / -]
0: On, 1: Off
051 SDK1
*CTL
[0 or 1 / 0 / 1] 0: ON. 1: OFF
Determines whether certification is required
before a user can use the SDK application.
061 SDK2
071 SDK3
5481
[Auth. Error Code]
This SP codes determines how the authentication failures are displayed.
001 System Log Disp *CTL
Determines whether an error code appears in the
system log after a user authentication failure
occurs.
[0 or 1/ 0 /1]
0: Off, 1: On
5501 [PM Alarm Interval] PM Alarm Interval
5501 001 Printout *CTL
Sets the PM alarm Interval.
[0 to 9999 / 0 / 1k prints/step]
The alert is sent to the e-mail address that is
specified for the system administrator using a
browser and the built-in web server (Web Image
Monitor).
0: Disables the PM alarm
When SP5-866-001 is set to "1", this SP is
enabled.
5504 [Jam Alarm]
5. System Maintenance Reference
114
To Next Page
Loading...
