EasyManua.ls Logo

Ricoh MD-P2 - Page 117

Ricoh MD-P2
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5504 001
Jam Alarm *CTL
[0 to 3 / 3 / 1/step]
0: Disables the jam alarm
1: 1.5K, 2: 3K, 3: 6K
Sets the jam alarm level. If a paper jam occurs, the jam alarm counter increases by +1.
If no paper jam occurs while the set number of paper is output, the jam alarm counter
decreases by -1. The jam alarm occurs when the jam alarm counter gets to +10.
The alert is sent to the e-mail address that is specified for the system administrator using
a browser and the built-in web server (Web Image Monitor).
When SP5-866-001 is set to "1", this SP is enabled.
5505 [Error Alarm]
5505 001
Error Alarm *CTL
[0 to 255 / 30 / 1/step]
0: Disables the PM alarm
Sets the error alarm level. If an SC code occurs, the error alarm counter increases by
+1. If no SC code occurs while the set number of paper is output, the jam alarm counter
decreases by -1. The error alarm occurs when the error alarm counter reaches +5.
The alert is sent to the e-mail address that is specified for the system administrator using
a browser and the built-in web server (Web Image Monitor).
When SP5-866-001 is set to "1", this SP is enabled.
5507 [Supply Alarm]
5507 001 Paper Size *CTL
Enables or disables the supply alarm.
[0 or 1 / 0 / -]
0: Off, 1: On
5507 006 Waste Toner Bottle *CTL
Enables or disables the supply alarm.
[0 or 1 / 1 / -]
0: Off, 1: On
5507 007 Transfer Belt *CTL
5507 008 Fusing unit *CTL
5507 008 Cartridge *CTL
5507 008 Toner Call Timing *CTL
Enables or disables the toner supply alarm.
[0 or 1 / 1 / -]
0: Toner end, 1: Toner near end
Main SP Tables: 1
115
5

Table of Contents

Related product manuals