Ricoh MD-P2 - Page 141

5848 210 LogType: Job 1 *CTL
Displays the log server settings.
These can be adjusted with the Web Image
Monitor.
5848 211 LogType: Job 2 *CTL
5848 212 LogType: Access *CTL
5848 213 PrimarySrv *CTL
5848 214 SecondarySrv *CTL
5848 215 Start Time *CTL
5848 216
Interval Time *CTL [1 to 1000 / 1 / 1 hour/step]
Specifies the interval of transmitting log information. This SP is activated only when the
SP5848-217 is set to "2".
5848 217 Timing *CTL [0 to 2 / 0 / 1 /step]
Selects the method for transmitting log information.
0: Transmitting OFF, 1: Always Transmitting, 2: Interval Transmitting
5849 [Installation Date]
5849 001 Display *CTL
Enables or disables the udirectory access
limitation.
0000: Disabled, 0001: Enabled
5849 002 Print *CTL
Determines whether the installation date is printed
on the printout for the total counter.
[0 to 1/1]
0: No Print
1: Print
5849 003 Total Counter *CTL
5851 [Bluetooth]
5851 001 Mode *CTL
Adjusts the Bluetooth setting.
[0 or 1 / 0 / -]
0: Public, 1: Private
5856 [Remote ROM Update]
Main SP Tables: 1
139
5