Ricoh MD-P2 - Page 142

5856 002 Local Port
Allows the technician to update the firmware
using a parallel cable.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
5857 [Debug Log Save]
5857 001 ON/ OFF *CTL
Enables Or Disables The Debug Log Saving
Function.
[0 or 1 / 0 / 1/Step] Alphanumeric
0: OFF, 1: ON
5857 002 Target *CTL
Sets the storage location for the debug log.
[2 or 3 / 2 / 1/step]
2: HDD, 3: SD
5857 005 Save to HDD *CTL Sets the key number of the debug log.
5857 006 Save to SD Card *CTL Sets the key number of the debug log.
5857 009 HDD to SD Latest *CTL
Copies the most recent 4 MB of the debug log
from the hard disk to the SD card.
5857 010 HDD to SD Any *CTL
Sets the key number of the debug log copied from
the hard disk to the SD card.
5857 011 Erase HDD Debug *CTL Deletes the debug log from the hard disk.
5857 012 Erase SD Debug *CTL Deletes the debug log from the SD card.
5857 013 Dsply-SD Space *CTL Shows the free space on the SD card.
5857 014 SD to SD Latest *CTL
Copies the most recent 4 MB of the debug log
from an SD card to a different SD card.
5857 015 SD to SD Any *CTL
Sets the key number of the debug log copied from
an SD card to a different SD card.
5. System Maintenance Reference
140
5