5857 016 Make HDD Debug File *CTL Makes a log file on the HDD to save debug logs.
To save debug logs, the controller makes a log
file first, then writes data in the file. This procedure
can use much time. The user can switch off the
main power switch before the log is written in the
file. To prevent this possible problem, you can
prepare a log file in advance. If you do this, the
controller uses less time to save logs because the
log file is prepared.
5857 017 Make SD Debug File *CTL
5858 [Debug Log Save: SC]
5858 001 Engine SC *CTL
Collects debug logs when an engine-related SC
code occurs.
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
5858 002 Controller SC *CTL
Collects debug logs when a controller-related SC
code occurs.
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
5858 003 Any SC *CTL
Sets the SC code whose logs are collected.
[00000 to 65535 / 0 / 1/step]
5858 004 Jam *CTL
Collects debug logs when a paper jam occurs.
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
5859 [Debug Log Save Key]
Main SP Tables: 1
141
To Next Page
Loading...
