EasyManua.ls Logo

Ricoh MD-P2 - Page 144

Ricoh MD-P2
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5859 001 Key 1 *CTL
Sets the key number of a specific event (see the
note below) whose logs are saved in the specified
storage place (see the note below). When
multiple key numbers are assigned, the logs are
collected in this order: Key 1, Key 2, ..., Key 9,
Key 10.
The event is set with SP5-857-2. The storage
is set with SP5-858.
[0000000 to 9999999 / 0 / 1/step]
5859 002 Key 2 *CTL
5859 003 Key 3 *CTL
5859 004 Key 4 *CTL
5859 005 Key 5 *CTL
5859 006 Key 6 *CTL
5859 007 Key 7 *CTL
5859 008 Key 8 *CTL
5859 009 Key 9 *CTL
5859 010 Key 10 *CTL
5860 [SMTP/ POP3/ IMAP4]
5860 002 SMTP Srv Port No. *CTL
Adjusts the number of the SMTP server ports.
[1 to 65535 / 25 / 1/step]
5860 003 SMTP Auth. *CTL
Enables or disables the SMTP authentication for
mail transfers.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
5860 006 SMTP Auth Encryp *CTL
Encrypts or does not encrypt passwords for
POP3/IMAP4 authentications.
[0 to 2 / 0 / 1/step]
0: Automatic, 1: Not encrypt, 2: Encrypt
5860 007 POP before SMTP *CTL
Enables or disables the authentication that is
executed on the POP server before the
communication is established with the SMTP
server to transfer mails.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
5. System Maintenance Reference
142
5

Table of Contents

Related product manuals