5860 008 POP to SMTP Wait *CTL
Adjusts the waiting time to access the SMTP server
after the authentication on the POP server.
[0 to 10000 / 300 / 1 ms/step]
5860 009 Mail Receive Pro *CTL
Sets the protocol of receiving e-mail.
[1 to 3 / 1 / 1/step]
1: POP3, 2: IMAP4, 3: SMTP
5860 013 POP3/IMAP4 Auth. *CTL
Encrypts or does not encrypt passwords for
POP3/IMAP4 authentications.
[0 to 2 / 0 / 1/step]
0: Automatic, 1: Not encrypt, 2: Encrypt
5860 014 POP3 Srvr Port No. *CTL
Adjusts the port number of the POP server.
[1 to 65535 / 110 / 1/step]
5860 015 IMAP4 Srv Port *CTL
Adjusts the port number of the IMAP4 server.
[1 to 65535 / 143 / 1/step]
5860 016 SMTP Rx Port No *CTL
Adjusts the port number of the SMTP server.
[1 to 65535 / 25 / 1/step]
5860 017 Mail Rx Interval *CTL
Adjusts the interval of receiving an e-mail.
[2 to 1440 / 3 / 1 minute/step]
5860 019 Mail Keep Setting *CTL
Sets the way of keeping the e-mail in the server.
[0 to 2 / 0 / 1/step]
0: Not keeping
1: Keeping All
2: Keeping the only error e-mail
5860 020 ParMail Rec TOut *CTL
Adjusts the time for keeping the partial e-mails. If
the partial e-mails are not received during the set
time, these are deleted.
[1 to 168 / 72 / 1 h/step]
5860 021 MDN Res RFC2298 *CTL
Determines whether RFC2298compliance is
switched on for MDN reply mail.
[0 or 1 / 1 / -]
0: No, 1: Yes
Main SP Tables: 1
143
To Next Page
Loading...
