Ricoh MD-P2 - Page 146

5860 022 SMTP Aut FileldRep *CTL
Determines whether the FROM item of the mail
header is switched to the validated account after
the SMTP server is validated.
[0 or 1 / 0 / 1/step]
0: No. “From” item not switched,
1: Yes. “From” item switched.
5860 025 SMTP Auth DirectSet *CTL
Selects directly the way of SMTP authentication if
all SMTP authentications fail due to the error in
the SP5860-006.
This SP is activated only when SP5860-003 is set
to “Enable”.
Bit switch 0: LOGIN
Bit switch 1: PLAIN
Bit switch 2: CRAM MD5
Bit switch 3: DIGEST MD
Bit switch 4 - 7: Not used
5860 026
S/MIVE: MIME Header
Setting
*CTL
Selects the MIME header type of an E-mail sent
by S/MIME.
[0 to 2 / 0 / 1]
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
5866 [E-Mail Report]
5866 001 Report Validity *CTL
Disables and re-enables the email notification
feature.
[0 or 1/ 0 / 1/step]
0: Enable, 1: Disable
5866 005 Add DataFiled *CTL
Enables or disables to add the date field on the
alert notice e-mail.
[0 or 1 / 0 / 1/step]
0: Off, 1: On
5. System Maintenance Reference
144
5