• Reformat the mail RX data on the HDD with SP5832-7
•
Replace the HDD
873
B
HDD mail send data error CTL
An error was detected on the HDD immediately after the machine was turned on, or power
was turned of while the machine was using the HDD.
• Do SP5832-007 (Format HDD – Mail TX Data) to initialize the HDD.
•
Replace the HDD.
874
D
Delete All error 1: HDD CTL
A data error was detected for the HDD/NVRAM after the Delete All option was used.
Note: The source of this error is the Data Overwrite Security Unit running from the DOS SD
card.
• Turn the main switch off/on, do the operation again.
•
Install the Data Overwrite Security Unit again.
• HDD defective
875
D
Delete All error 2: Data area CTL
An error occurred when the machine deleted data from the HDD.
Note: The source of this error is the Data Overwrite Security Unit running from the DOS SD
card.
• Turn the main switch off/on and try the operation again.
876
D
Log data errors CTL
SC Conditions
211
To Next Page
Loading...
