Ricoh MD-P2 - Page 266

2186 007
Result *EGB [0 to 999999 / 0 / 1 /step]
MUSIC executing: 0000
MUSIC success: xxx1 ("x": any numbers)
Pattern detection error: xxx2 ("x": any numbers)
Skew error: 0003
Bend error: 0004
Sub-scan shift error: 0005
Main-scan shift error: 0006
D-phase error: 0007
MUSIC interruption: 0008
No MUSIC execution: 0009
2186 008 Execution *EGB
Displays the number of MUSIC execution.
[0 to 9999 / 0 / 1 /step]
2186 009 Failure *EGB
Displays the number of MUSIC failure.
[0 to 9999 / 0 / 1 /step]
2190
[Transfer Adj]
Configures the settings for the image transfer belt reverse cleaning.
001
Belt Cleaning *EGB
[0 or 1 / 1 / 1 /step]
0: Off, 1: On
Turns on or off the reverse cleaning mode for the image transfer belt.
002 Paper Trans:Side1 DFU *EGB [-15 to 15 / 0 / 1 /step]
003 Paper Trans:Side2 DFU *EGB [-15 to 15 / 0 / 1 /step]
004 Media Type DFU *EGB [0 to 19 / 0 / 1 /step]
2191 [Laser Unit] DFU
001 LD Default Set *EGB
Returns the current settings for the laser unit to
the factory settings.
011 Bk Data *EGB Inputs the BK LD initial data.
012 M Data *EGB Inputs the M LD initial data.
3. Appendix: SP Mode Tables
34
3