5507 080 Toner Call Timing *CTL
Enables or disables the toner supply alarm.
[0 or 1 / 0 / -]
0: Toner end, 1: Toner near end
5507 128 Interval: Others *CTL
Sets the paper supply alarm level. A paper supply
alarm
counter increases by +1 when a sheet of the
related size is used. The paper supply alarm occurs
when one of the paper supply alarm counters gets
to the set value.
[250 to 10000 / 1000 / 1/step]
5507 133 Interval: A4 *CTL
5507 134 Interval: A5 *CTL
5507 142 Interval: B5 *CTL
5507 164 Interval: LG *CTL
5507 166 Interval: LT *CTL
5507 172 Interval: HLT *CTL
The alert is sent to the e-mail address that is specified for the system administrator using
a browser and the built-in web server (Web Image Monitor).
When SP5-866-001 is set to "1", this SP is enabled.
5515
[SC/Alarm Setting]
Turns on or off the following SC alarm settings. These SP's are active when the CSS or
NRS is enabled.
5515 001 SC Call *CTL [0 or 1 / 1 / - ] 0: OFF, 1: ON
5515 002 Service Parts Ne *CTL
This SP activates the service parts near end call.
[0 or 1 / 0 / - ] 0: OFF, 1: ON
5515 003 Service Parts En *CTL
This SP activates the service parts end call.
[0 or 1 / 0 / - ] 0: OFF, 1: ON
5515 004 User Call *CTL [0 or 1 / 1 / - ] 0: OFF, 1: ON
5515 006 Communication Te *CTL
This SP activates the communication test call.
[0 or 1 / 1 / - ] 0: OFF, 1: ON
5515 007 Machine Infomat *CTL
This SP activates the machine information call.
[0 or 1 / 1 / - ] 0: OFF, 1: ON
5515 008 Alarm Notice *CTL [0 or 1 / 0 / - ] 0: OFF, 1: ON
Engine SP5-xxx
45
To Next Page
Loading...
