5812 002 Facsimile *CTL
Sets the fax or telephone number for a service
representative. This number is printed on the
Counter List, which can be printed with the user’s
"Counter" menu if the Meter Charge mode is
selected with SP5-930-1. This can be up to 19
characters (both numbers and alphabetic
characters can be input).
5816 [NRS Function] These settings are used for NRS.
5816 001 I/F Setting *CTL
[0 to 2 / 2 / 1/step] Alphanumeric
0: Off, 1: CSS (Not used)
2: Network (The remote service function is on.)
5816 002 CE Call *CTL
[0 or 1 / 1 / 1/step]
0: Start, 1: End
5816 003 Function Flag *CTL
[0 or 1 / 0 / 1/step]
0: Off (The remote service function is disabled.)
1: On (The remote service function is enabled.)
5816 007 SSL Disable *CTL
[0 to 1 / 0 / 1/step]
0: On, 1: Off
5816 008 RCG Connect T/O *CTL
Sets the timeout counter for the remote connection.
[1 to 90 / 30 / 1 second/step]
5816 009 RCG Write Timeout *CTL
Sets the timeout counter for writing processing.
[0 to 100 / 60 / 1 second/step]
5816 010 RCG Read Timeout *CTL
Sets the timeout counter for reading processing.
[0 to 100 / 60 / 1 second/step]
5816 011 Port 80 *CTL
Enables or disables access to the SOAP method
via port 80.
[0 to 1 / 0 / 1/step]
0: Disables, 1: Enables
3. Appendix: SP Mode Tables
48
To Next Page
Loading...
