EasyManua.ls Logo

Ricoh MD-P2 - Page 288

Ricoh MD-P2
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error Caused by
Response
from GW
URL
-2385
Attempted dial up overseas without the correct
international prefix for the telephone number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 Basil not managed
-2394 Device not managed
-2395 Box ID for Basil is illegal
-2396 Device ID for Basil is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
5816 209
Instl Clear *CTL
Releases a machine from its Cumin setup.
5816 250
Print Com Log *CTL
Prints the communication log.
5821 [NRS Address]
5821 002
RCG IP Address (used for
NRS)
*CTL
Sets the IP address of the RCG (Remote
Communication Gate).
[00000000h to FFFFFFFFh / 00000000h / 1/
step]
5824 [NVRAM Upload]
5824 001 NVRAM Upload #
Uploads the UP and SP mode data (except for
counters and the serial number) from the NVRAM
to an SD card.
3. Appendix: SP Mode Tables
56

Table of Contents

Related product manuals