5825 [NVRAM Download]
5825 001 NVRAM Download #
Downloads the UP and SP mode data from an SD
card to the NVRAM.
5828 [Network Setting] Job spool settings/ Interface selection for Ethernet and wireless LAN
5828 050 1284 Compatible *CTL
Switches Centronics IEEE1284 compatibility on/
off for the network.
[ 0 or 1 / 1 / - ]
0: Disabled, 1: Enabled
• Selecting “0” disables bi-directional data
transmission.
5828 052 ECP *CTL
Switches the ECP setting for Centronics off/on.
[0 or 1 / 1 / -]
0: Disabled, 1: Enabled
• With “1” selected, SP5-828-050 must be
enabled for 1284 mode compatibility.
5828 065 Job Spool *CTL
Switches the job spool on/off.
[0 or 1 / 0 / -]
0: Disabled, 1: Enabled
5828 066 HD job Clear *CTL
Selects the treatment of the job when a spooled job
exists at power on.
[0 or 1 / 1 / 1/step]
0: ON, 1: OFF
Engine SP5-xxx
57
To Next Page
Loading...
