5804 044 11g Slot Time *CTL
Selects the slot time for IEEE802.11.
[0 to 1 / 0 / 1] 0: 20 m, 1: 9 m
This SP is displayed only when the IEEE802.11
card is installed.
5804 045 WPA Debug Lvl *CTL
Selects the debug level for WPA authentication
application.
[1 to 3 / 3 / 1] 1: Info, 2: warning, 3: error
This SP is displayed only when the IEEE802.11
card is installed.
5842 [GWWS Analysis] Net File Application Analysis
5842 001 Setting 1 *CTL
Prints or does not print the module log for each bit.
[0 or 1 / 0 / 1/step]
0: Prints, 1: Not print
Bit switches:
•
Bit 0: System or other related application.
• Bit 1: Captured related application
• Bit 2: Certification related application
• Bit 3: Address related application
• Bit 4: Control devices or transmission logs
related application
• Bit 5: Output (print, fax or transmission)
related application
• Bit 6: Documents related application in bit 7,
0: Not printed, 1: Printed
• Bit 7: MSB related application
5842 002 Setting 2 *CTL
Selects the stamp type for the log of Net File
Application Analysis.
Bit switches:
•
Bit 0 to 6: Not used.
• Bit 7
0: Minute/second/micro second
1: Date/hour/minute/second
3. Appendix: SP Mode Tables
62
To Next Page
Loading...
