Ricoh MD-P2 - Page 295

5844 [USB]
5844 001 Transfer Rate *CTL
Adjusts the USB transfer rate.
[0001 or 0004 / 0004 / -]
0001: Full speed, 0004: Auto Change
5844 002 Vendor ID *CTL Displays the vendor ID.
5844 003 Product ID *CTL Displays the product ID.
5844 004 Device Release Num *CTL Displays the device release version number.
5844 005
Fixed USB Port *CTL [0 to 2 / 0 / 1 /step]
Selects the fixed USB port mode.
0: OFF,
1: Level 1 (No requirement of printer driver installation for the same model)
2: Level 2 (No requirement of printer driver installation for the specified models)
5844 006 PnP Model Name
Inputs appropriate model name.
5844 006 PnP Serial Number
Inputs appropriate serial number.
5844 100 Notify Unsupport
Turn on or off the unsupported device message function.
[0 or 1 / 1 / -]
0: Off (Not displayed), 1: On (Displayed)
5845 [Delivery Srv] Delivery Server Setting
5845 003 Retry Interval *CTL
Specifies the retry interval.
[60 to 900 / 300 / 1 second/step]
5845 004 No. of Retries *CTL
Specifies the maximum number of retries.
[0 to 99 / 3 / 1/step]
Engine SP5-xxx
63
3