5845 022 Instant Trans Off *CTL
Switches instant transmission off/on.
[0 or 1 / 1 / -]
1: Off. Instant transmission not possible with
network setting errors.
0: On. Instant transmission possible with network
setting errors.
• The machine will continue to transmit over the network, even if the network settings
are incorrect. (This causes multiple errors, of course.)
• With
this SP off, the machine will stop communicating with the network if the settings
are wrong. This reduces the amount of spurious network traffic caused by errors due
to incorrect settings.
5846 [UCS Setting]
5846 010
LDAP Search TOut *CTL [1 to 255 / 60 / 1 /step]
Sets the length of the timeout for the search of the LDAP server.
5846 041
AddtB Acl Info *CTL
This SP must be executed immediately after installation of an HDD unit in a basic machine
that
previously had no HDD. The first time the machine is powered on with the new HDD
installed, the system automatically takes the address book from the NVRAM and writes
it onto the new HDD. However, the new address book on the HDD can be accessed only
by the system administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
5846 043 AddrB Media *CTL
Displays the slot number where an address book
data is in.
[0 to 30 / - /1]
0: Unconfirmed
1: SD Slot 1
2: SD Slot 2
4: USB Flash ROM
20: HDD
30: Nothing
3. Appendix: SP Mode Tables
64
To Next Page
Loading...
