Ricoh MD-P2 - Page 298

5846 062
Compl Opt1 *CTL [0 to 32 / 0 / 1 /step]
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to upper case and sets the length of the
password.
• This SP does not normally require adjustment.
•
This SP is enabled only after the system administrator has set up a group password
policy to control access to the address book.
5846 063
Compl Opt2 *CTL [0 to 32 / 0 / 1 /step]
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to lower case and defines the length of the
password.
• This SP does not normally require adjustment.
•
This SP is enabled only after the system administrator has set up a group password
policy to control access to the address book.
5846 064
Compl Opt3 *CTL [0 to 32 / 0 / 1 /step]
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to numbers and defines the length of the
password.
• This SP does not normally require adjustment.
•
This SP is enabled only after the system administrator has set up a group password
policy to control access to the address book.
5846 065
Compl Opt4 *CTL [0 to 32 / 0 / 1 /step]
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to symbols and defines the length of the
password.
• This SP does not normally require adjustment.
•
This SP is enabled only after the system administrator has set up a group password
policy to control access to the address book.
3. Appendix: SP Mode Tables
66
3