5846 094
Encryption Stat *CTL [0 to 255 / - / 1 /step] No default
Shows the status of the encryption function of the address book on the LDAP server.
0: No encryption
1: Encryption
2: Decrypting from encrypted data to plain data
3: Encrypting from plain data to encrypted data
4: Decrypted from encrypted data to plain data
5: Encrypted from plain data to encrypted data
6: Changing the encryption setting
7: Changing the encryption key is done.
8: Deleting the encryption key is done before changing the setting.
9: Changing the encryption setting is done.
5848 [Web Service]
5848 004 ac: UD *CTL
Enables or disables the undirectory access
limitation.
0000: Disabled, 0001: Enabled
5848 009 ac: Job Ctrl
Switches access control on and off.
0000: OFF, 0001: ON
5848 011 ac: Dev Mng *CTL
5848 022 ac:Uadmin *CTL
5848 210 LogType: Job 1 *CTL
Displays the log server settings.
These can be adjusted with the Web Image
Monitor.
5848 211 LogType: Job 2 *CTL
5848 212 LogType: Access *CTL
5848 213 PrimarySrv *CTL
5848 214 SecondarySrv *CTL
5848 215 Start Time *CTL
5848 216
Interval Time *CTL [1 to 1000 / 1 / 1 hour/step]
Specifies the interval of transmitting log information. This SP is activated only when the
SP5848-217 is set to "2".
Engine SP5-xxx
67
To Next Page
Loading...
