Ricoh MD-P2 - Page 300

5848 217 Timing *CTL [0 to 2 / 0 / 1 /step]
Selects the method for transmitting log information.
0: Transmitting OFF, 1: Always Transmitting, 2: Interval Transmitting
5849 [Installation Date]
5849 001 Display *CTL
Enables or disables the udirectory access limitation.
0000: Disabled, 0001: Enabled
5849 002 Print *CTL
Determines whether the installation date is printed
on the printout for the total counter.
[0 or 1 / 1 / -]
0: No Print, 1: Print
5849 003 Total Counter *CTL
5851 [Bluetooth]
5851 001 Mode *CTL
Adjusts the Bluetooth setting.
[0 or 1 / 0 / -]
0: Public, 1: Private
5856 [Remote ROM Update]
5856 002 Local Port
Allows the technician to update the firmware using
a parallel cable.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
5857 [Debug Log Save]
5857 001 ON/ OFF *CTL
Enables Or Disables The Debug Log Saving
Function.
[0 or 1 / 0 / 1/Step] Alphanumeric
0: OFF, 1: ON
3. Appendix: SP Mode Tables
68
3