Ricoh MD-P2 - Page 303

5860 006 SMTP Auth Encryp *CTL
Encrypts or does not encrypt passwords for POP3/
IMAP4 authentications.
[0 to 2 / 0 / 1/step]
0: Automatic, 1: Not encrypt, 2: Encrypt
5860 007 POP before SMTP *CTL
Enables or disables the authentication that is
executed on the POP server before the
communication is established with the SMTP server
to transfer mails.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
5860 008 POP to SMTP Wait *CTL
Adjusts the waiting time to access the SMTP server
after the authentication on the POP server.
[0 to 10000 / 300 / 1 ms/step]
5860 009 Mail Receive Pro *CTL
Sets the protocol of receiving e-mail.
[1 to 3 / 1 / 1/step]
1: POP3, 2: IMAP4, 3: SMTP
5860 013 POP3/IMAP4 Auth. *CTL
Encrypts or does not encrypt passwords for POP3/
IMAP4 authentications.
[0 to 2 / 0 / 1/step]
0: Automatic, 1: Not encrypt, 2: Encrypt
5860 014 POP3 Srvr Port No. *CTL
Adjusts the port number of the POP server.
[1 to 65535 / 110 / 1/step]
5860 015 IMAP4 Srv Port *CTL
Adjusts the port number of the IMAP4 server.
[1 to 65535 / 143 / 1/step]
5860 016 SMTP Rx Port No *CTL
Adjusts the port number of the SMTP server.
[1 to 65535 / 25 / 1/step]
5860 017 Mail Rx Interval *CTL
Adjusts the interval of receiving an e-mail.
[2 to 1440 / 3 / 1 minute/step]
Engine SP5-xxx
71
3