Ricoh MD-P2 - Page 302

5858 002 Controller SC *CTL
Collects debug logs when a controller-related SC
code occurs.
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
5858 003 Any SC *CTL
Sets the SC code whose logs are collected.
[00000 to 65535 / 0 / 1/step]
5858 004 Jam *CTL
Collects debug logs when a paper jam occurs.
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
5859 [Debug Log Save Key]
5859 001 Key 1 *CTL
Sets the key number of a specific event (see the note
below) whose logs are saved in the specified
storage
place (see the note below). When multiple
key numbers are assigned, the logs are collected
in this order: Key 1, Key 2, ..., Key 9, Key 10.
• The event is set with SP5-857-2. The storage
is set with SP5-858.
[0000000 to 9999999 / 0 / 1/step]
5859 002 Key 2 *CTL
5859 003 Key 3 *CTL
5859 004 Key 4 *CTL
5859 005 Key 5 *CTL
5859 006 Key 6 *CTL
5859 007 Key 7 *CTL
5859 008 Key 8 *CTL
5859 009 Key 9 *CTL
5859 010 Key 10 *CTL
5860 [SMTP/ POP3/ IMAP4]
5860 002 SMTP Srv Port No. *CTL
Adjusts the number of the SMTP server ports.
[1 to 65535 / 25 / 1/step]
5860 003 SMTP Auth. *CTL
Enables or disables the SMTP authentication for
mail transfers.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
3. Appendix: SP Mode Tables
70
3