2. On the Home screen, press [Settings].
3. Press [System Settings].
4. Press [Settings for Administrator] [Authentication/Charge] [Administrator
Authentication/User Authentication/App Auth.] [Register/Change Administrator]
[Set Administrator Login User Name/Login Password].
5. Press the desired built-in administrator ([Administrator 1] to [Administrator 4]).
6. Press [Change] next to Login Password.
7. Enter the login password for New Password.
8. Enter the login password for Confirm New Password again.
9. Press [OK] twice.
10. Press [Close].
11. Press [OK].
When settings are complete, the machine logs you out automatically.
For the characters that can be used for login user names and passwords, see Usable
Characters for User Names and Passwords.
You cannot specify the same login user name for the supervisor and the administrators.
To Next Page
Loading...
