Specify the functions to restrict with User Code authentication.
1. Log in to the machine as the machine administrator on the control panel.
Logging in to the Machine as an Administrator
2. On the Home screen, press [Settings].
3. Press [System Settings].
4. Press [Settings for Administrator] [Authentication/Charge] [Administrator
Authentication/User Authentication/App Auth.] [User Authentication
Management].
5. Select [User Code Authentication] from the list next to User Authentication
Management.
6. From Functions to Restrict, select the functions to restrict against use.
Specify whether to perform User Code authentication for each function. For Copier
Function and Printer Function, you can specify to perform User Code authentication
for all Copier or Printer functions, or for the color print mode only.
When registering the user code of the printer driver automatically, select [PC Control]
for Printer Function. Specify the user code registered in the Address Book to the
printer driver.
Specifying User Code Authentication
To Next Page
Loading...
