When [PC Control] is selected, the user code specified in the printer driver is
registered in the Address Book automatically and is excluded from the print volume
use limitation. To limit the print volume use, select other than [PC Control] for Printer
Function.
Specifying Maximum Print Volume Use of Each User
For Printer Job Authentication, specify the security level for print jobs using the
printer driver.
Executing a Print Job with Authentication Information Only
7. Press [OK].
8. Press [Home] ( ).
9. When the confirmation dialog is displayed, press [OK] to log out of the machine.
If registration of the user information is not completed, register the user in the Address
Book and specify the user code.
Registering the User Code in the Address Book
Register the default values of the functions available to each user with Basic authentication.
1. Log in to the machine as the machine administrator on the control panel.
Logging in to the Machine as an Administrator
2. On the Home screen, press [Settings].
3. Press [System Settings].
4. Press [Settings for Administrator] [Authentication/Charge] [Administrator
Authentication/User Authentication/App Auth.] [User Authentication
Management].
Section Top
Specifying Basic Authentication
To Next Page
Loading...
