Specify Tray for Lines Select whether to specify a tray to eject the printed sheets of
the received document per line type and sender (telephone
line, Internet Fax, or IP-Fax).
Default: [Off]
Print with Margin Specify whether to compress the received documents for
printing.
Default: [Off]
Printing the Received Document Slightly Smaller
Setting Items Description
Folder Transfer Result Report Select whether to notify the specified destination of the result
of transferring a document by e-mail when the destination of
forwarding or Forwarding per Sender includes a folder. You
can apply the security setting (encryption and signature) to
the e-mail.
Default: [Do not Email]
Email address/Folder Path on
Communication Log
Specify whether to display the e-mail address or folder path
instead of the destination's name in the destination field of
the transmission history when sending or forwarding a
document to a destination registered in the address book.
Default: [Do not Display]
File Name Setting in Folder Transfer Specify the settings related to the file name of the document
transferred to folders, such as adding destination information
and limiting characters that can be used. When limited, you
can only use alphanumeric characters, "-", and "_" in the file
name; however, the last two are not allowed to be used at the
beginning of the file name.
Default
Add Sender Information to File Name: [No]
Limit File Name Character Type: [No]
Section Top
Folder Transfer Settings
Section Top
To Next Page
Loading...
