Ricoh MP 4002 - Copying Documents; Place Originals in Document Feeder; Select Copier from Home Screen; Adjust Paper Guides and Copy Settings

Page 2
Alternate: If using the Platen Glass,
lift the lid and place documents face
down on the glass at the position of
arrow, regardless of size.
Remove paperclips, staples or other loose objects before placing originals in feeder. Be sure to straighten bent or curled
edges.
Copying Documents
1. Place Originals in the Document
Feeder
2. Adjust paper guides.
4. Select any additional copy settings
3. Select Copier from the Home Screen
Press original document type, i.e. Text, Text/Photo, Photo, etc.
Press [sort] to collate document (if not highlighted)
Enter any nishing options
Enter desired number of copies
Press [Sample Copy] copier will print one completed set and prompt you to:
[Suspend] to cancel job or change settings
[Continue] if job is correct to complete remaining copy sets
Or, press START to skip [Sample Copy]