Ricoh MP C306 User Manual

Messages Displayed When You Use the Printer
Function
This section describes the principal messages that appear on the display panel, error logs or reports. If
other messages appear, follow their instructions.
Messages Displayed on the Control Panel When You Use the Printer Function
• Before turning off the power, see page 52 "Turning On/Off the Power".
Message Cause Solution
"Hardware Problem:
Ethernet"
An error has occurred in the
Ethernet interface.
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
"Hardware Problem: HDD" An error has occurred in the
hard disk.
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
"Hardware Problem: USB" An error has occurred in the
USB interface.
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
"Hardware Problem:
Wireless Card"
(A "wireless LAN board" or
"Bluetooth interface unit" is
referred to as a "wireless
card".)
• The wireless LAN board
has malfunctioned.
• The wireless LAN board
you are using is not
compatible with this
machine.
Turn off the power, and then confirm
the wireless LAN board is inserted
correctly. And then, turn on the
power again. If the message
appears again, contact your service
representative.
10. Troubleshooting
166

Ricoh MP C306 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Paper Capacity	350 sheets
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Memory	2 GB
Print Speed	30 ppm
Connectivity	USB, Ethernet, Wi-Fi
Operating System Compatibility	Windows, Mac, Linux
Max Paper Size	A4
Scan Speed	30 ipm