Ricoh MP C306 - Placing Originals on the Exposure Glass (Mainly North America)

2. Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Start with the first page to be scanned.
1
1
DCH040
1. Positioning mark
3. Lower the ADF.
Placing Originals on the Exposure Glass (mainly North America)
• Keep your hands away from the hinges and exposure glass when lowering the ADF. Not doing
so may result in an injury if your hands or fingers are pinched.
• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
1. Lift the ADF.
2. Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Start with the first page to be scanned.
1
1
DCH040
2. Getting Started
58