Copying onto Custom Size Paper
Paper that has a horizontal length of 139.0–600.0 mm (5.48–23.62 inches) and a vertical length of
76.2–216.0 mm (3.00–8.50 inches) can be fed in from the bypass tray. Note however that the
limitation on the horizontal and vertical length range will vary depending on which options are installed.
• When prints are delivered to Internal tray 2:
Horizontal length: 210.0–600.0 mm (8.27–23.62 inches), vertical length: 139.7–216.0 mm
(5.50–8.50 inches)
1. Load the paper face down in the bypass tray.
The bypass tray ( ) is automatically selected.
2. Press [ ].
3. Press [Paper Size].
4. Press [Custom Size].
5. Enter the horizontal size with the number keys, and then press [ ].
6. Enter the vertical size with the number keys, and then press [ ].
7. Press [OK] twice.
8. Place the originals, and then press [Start].
Copying onto Custom Size Paper
75
To Next Page
Loading...
