This section explains how to register functions to a program by using the copier function and the quick
copy function as examples.
Register functions to a program by the Document Server, facsimile, or scanner function as you do by
using the copier function. Register functions to a program by using the quick fax or quick scanner
function as you do by using the quick copy function.
Copier
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [Copier] icon on Home screen 4.
3. Edit the copy settings so all functions you want to register to a program are selected.
4. Press [Recall/Program/Change Program] on the bottom left of the screen.
5. Press [Program].
6. Press the program number you want to register.
7. Enter the program name.
8. Press [OK].
9. Press [Exit].
Quick Copy
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Press the [Quick Copy] icon.
3. Edit the copy settings so all functions you want to register to a program are selected.
4. Press [Menu] ( ) at the bottom of the screen in the center.
5. Press [Reg. Current Setting to Program].
6. Press the program number you want to register.
7. Enter the program name.
8. Select the icon for the program.
9. Press [OK].
Registering Functions in a Program
47
To Next Page
Loading...
