To Next PageTo Next PageWhat to do if error message persists on Ricoh MP W6700 Printer after closing the cover?
If an error message is still displayed even after closing the indicated cover, it means that one or more covers that are not indicated are still open. Ensure that all the covers of the Ricoh printer are properly closed.
General| Warm-up time | 120 seconds |
|---|---|
| Power source | 220 - 240 V, 50/60 Hz |
| Print Speed | 6.7 ppm (A1 horizontal) |
| Resolution | 600 dpi |
| Maximum Print Width | 914 mm |
| Media Types | Plain paper |
| Connectivity | USB 2.0, Ethernet 10/100/1000 Base-T |
| Dimensions | 1, 250 x 755 x 1, 200 mm |
| Original Size | 24 inches |
| Memory | 512 MB |
| Paper weight | 52 - 110 g/m² |
| Supported paper sizes | A4 - A0 |
| Paper input capacity | 2 rolls |
Covers the procedure for safely powering the machine on and off.
Explains the process of user authentication and login procedures.
Step-by-step guide to performing a basic copy operation.
Basic steps for printing documents from an application.
Step-by-step guide for scanning documents directly to a folder.
Instructions for scanning documents and sending them via email.
How to scan and save files directly to the machine's storage.
Detailed instructions for loading various types of paper into trays.
Procedures and precautions for installing new toner cartridges.
Step-by-step guide on how to replace the toner cartridge.
Explains status icons and machine beep patterns for problem identification.
Addresses issues like machine not responding or incorrect startup behavior.
Lists and explains error messages related to copy and document server functions.
