Ricoh P C300W - Page 87

Displays the machine's MAC address.
• Current Connection
Displays detailed information about the connection, such as the SSID and the wireless signal
strength.
• Input SSID
Input the SSID of the machine.
• WPS
Connects with one touch using WPS (Wi-Fi Protected Setup). For details, see Setup Guide.
• PBC
• PIN
• Wi-Fi Direct
Input the SSID of the machine to configure Wi-Fi Direct.
• W-iFi Dir. PWD
Input SSID to set a password for Wi-Fi Direct.
• Wi-Fi Direct Type
Select 2.4 GHz or 5 GHz as the wireless LAN frequency.
Default: [2.4 GHz]
• 2.4 GHz
• 5 GHz
IPv4 Configuration
• DHCP
Sets the machine to receive its IPv4 address, subnet mask, and default gateway address
automatically from a DHCP server.
Default: [Active]
• Inactive
• Active
• IP Address
Specifies the machine's IPv4 address when DHCP is not used.
Use this menu to check the current IP address when DHCP is used.
Default: 11.22.33.44
• Subnet Mask
Specifies the machine's subnet mask when DHCP is not used.
Use this menu to check the current subnet mask when DHCP is used.
Default: 255.255.255.0
Network Settings
85