EasyManua.ls Logo

Ricoh P C300W - Page 88

Ricoh P C300W
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gateway Address
Specifies the machine's default gateway address when DHCP is not used.
Use this menu to check the current default gateway address when DHCP is used.
Default: 11.22.33.44
IP Address Method
Displays the IP address acquisition method.
DHCP
Auto IP
Manual Config.
Default IP
Wi-Fi Direct IP Address
Displays the IP address of Wi-Fi Direct.
IPv6 Configuration
IPv6
Selects whether to enable or disable IPv6.
Default: [Active]
Inactive
Active
DHCP
Sets the printer to receive its IPv6 address from a DHCP server.
When DHCP is used, you cannot specify the IPv6 address manually.
Default: [Inactive]
Inactive
Active
IP Address (DHCP)
Displays the IPv6 address obtained from a DHCP server.
Manual Config. Address
Manual Config. Address
Specifies the machine's IPv6 address when DHCP is not used. Can contain up to 39
characters.
Prefix Length
Specifies the prefix length, using a value between 0 and 128.
Gateway Address
4. Configuring the Machine Using the Control Panel
86

Table of Contents

Other manuals for Ricoh P C300W

Related product manuals