Ricoh Pro 907 - Removing Staple Waste; Finisher; Booklet Finisher

Removing Staple Waste
This section describes how to remove staple waste.
• While "Waste Staple Receptacle is full." is displayed, you cannot use the staple function.
• "Waste Staple Receptacle is full." is displayed until the waste staple box is reinstalled.
• If the message is still displayed, reinstall the waste staple box.
Finisher
Use the following procedure to remove staple waste from the Finisher.
BQL032S
Booklet Finisher
Use the following procedure to remove staple waste from the Booklet Finisher.
BQL034S
Removing Staple Waste
73
3