3. Select the registered custom paper.
4. Press [ ] twice.
5. Press [Change] in "Advanced Settings".
6. Press 059: [Fusing Nip Width Adjustment:Envelope].
7. Using the numeric keys, keep decreasing the value by "250" and checking the print result.
Decreasing the value in [Fusing Nip Width Adjustment:Envelope] too much may lead to insufficient
toner fusing. Take care not to decrease the value too much.
If creases do not appear but the toner fusing is insufficient, keep increasing the value by "250"
and checking the print result.
Printing on Envelopes
49
To Next Page
Loading...
