4. Press the [Destinations] Tab [Folder].
5. Select [SMB (Send to Shared Folder on PC)] in [Protocol].
6. Specify the network path to the shared folder in "Path".
• Entering the path manually
As an example, if the destination computer's IP address is "192.168.1.200" and the shared
folder's name is "scan", enter the path as follows:
\\192.168.1.200\scan
You can also specify the path using the computer name instead of the IP address.
Example: \\Tanaka\scan
• Selecting the folder from the list
By pressing [Browse Network], the computers and shared folders in the network to which the
machine is connected appear. Select the shared folder to use as the destination.
To display the IP address on Windows 10, click [Start], [Settings], and then [Network &
Internet]. In Status, click [View your network properties].
Registering Scan-to-Folder Destinations
77
To Next Page
Loading...
