2. Load paper into the paper tray with print side up.
Do not stack paper over the limit mark.
3. Carefully push the paper tray fully in.
• Various sizes of paper can be loaded in the two-tray wide LCT by adjusting the positions of side
fence and end fence. For details, see page 147 "Changing the Paper Size in the Two-tray Wide
Large Capacity Tray".
• You can load envelopes in the two-tray wide LCT. When loading envelopes, place them in the
correct orientation. For details, see page 177 "Envelopes".
Loading Paper into the Interposer
• Do not place anything on top of or leave documents on the sensor. This may lead to the paper size
not being correctly scanned or paper jams.
1. While pressing the release lever, align the side fences with the paper size to be loaded.
2. Load paper orderly.
Do not stack paper over the limit mark.
Loading Paper
131
To Next Page
Loading...
