Changing a Stored Program
• When the content of a program that is registered to the [Home] screen as a shortcut is changed, the
content of the shortcut on the [Home] screen is also changed.
Changing the settings of the program
You can change the settings of the program and overwrite the exiting program.
1. Recall a program.
For details, see page 188 "Recalling a Stored Program".
2. Edit the settings so all functions you want to store in a program are selected.
3. Press the [Program] key.
4. Press [Program].
5. Press the program number you want to change.
6. Press [Yes].
7. Enter the program name.
8. Press [OK].
9. Press [Exit].
• When it is overwritten, the previous program is deleted.
• You can change the settings of a program and then save it as a new program. Press a program
number that does not have a .
Changing the name of program
1. Display the [Copier], [Document Server], or [Scanner] screen.
Registering Frequently Used Functions
189
To Next Page
Loading...
