user's [Home] screen. For details about the default [Home] screen and user's [Home] screen, see
page 194 "Types of [Home] Screens and How to Customize Them".
Recalling a Stored Program
You can recall the program and operate the machine using the stored settings.
1. Display the [Copier], [Document Server], or [Scanner] screen.
2. Press the [Program] key.
3. Make sure that [Recall] is selected.
4. Press the program number you want to recall.
To recall a program in which a password-protected folder is registered, you must enter the
password.
• Only programs with next to them contain a program.
• Using the program causes the previous settings to be cleared.
• If you have not programmed any destinations or scan settings as programs, select the program
number, and then specify the settings.
• The content of destinations that are registered in a program of the scanner mode is changed if the
content of the Address Book is changed.
• You cannot add or delete destinations when you recall the scanner mode program in which
destinations are registered. If you want to delete destinations, press the [Reset] key to clear the
recalled settings.
• If destinations are registered in a scanner mode program that you recalled, destinations will not be
recalled if [Program Setting for Destinations] is set to [Exclude Destinations] in [Scanner Features].
5. Convenient Functions
188
To Next Page
Loading...
