5. Select [Function Key 1], [Function Key 2], [Function Key 3], or [Function Key 4] which you
want to assign to a function to.
6. Select a function, and then press [OK].
To cancel a function that has been assigned, select [Do not Allocate], and then press [OK].
7. Press the [User Tools] key.
• Only 1 function can be assigned to a function key.
• The same function or program cannot be assigned to more than one function key.
• These settings can also be configured from Web Image Monitor. For details, see Web Image
Monitor Help.
• For details about how to make a program, see page 181 "Registering Functions in a Program".
System Reset
After finishing a job, the machine waits a specified length of time and then restores its settings to the
default values specified under Function Priority. This function is called "System Reset". For details about
Function Priority, see "System Settings", Connecting the Machine/ System Settings.
To change the length of time that the machine waits before restoring its settings to their default values,
use the System Auto Reset Timer setting. See "System Settings", Connecting the Machine/ System
Settings.
Changing Modes
53
To Next Page
Loading...
