1 23 4567
8
9
10
11
12
13
14
DER036
1. [Reg. No.]
Press to specify a destination using a five-digit registration number.
2. Operational status and messages
Displays operational status and messages.
3. Email / Folder
Press to switch between the [Scan to Folder] screen and [Email] screen.
• When
(Email) is selected, you can specify e-mail destinations.
• When (Folder) is selected, you can specify folder destinations.
Also switch the screen when sending a file simultaneously by both Scan to Folder and e-mail.
4. Scan to Folder icon
Shows that the [Scan to Folder] screen is displayed.
5. [Manual Entry]
To specify destinations not registered in the address book, specify Scan to Folder destinations on the screen
displayed by pressing this key.
6. [Recent]
Press this key to select destinations that have been recently specified using [Manual Entry]. If there is more than
one recent destination, press [ ] or [ ] to scroll through them.
7. Switch screens
Press to switch to the [WSD scanner (Push Type)] screen or the [DSM scanner] screen. If you are using the
WSD scanner, [WSD Dest.] appears. If you are using the DSM scanner, [DSM Destination] appears.
8. [Check Modes]
Allows you to confirm the scanning settings.
How to Use the Screens on the Control Panel
63
To Next Page
Loading...
