8. [Zoom Out] and [Zoom In]
Press to reduce or enlarge the displayed preview.
9. Preview image
Displays a preview of scanned documents. Double-tapping the image allows you to enlarge and display it at
the original magnification. The position where you tapped the image is displayed in the center of the preview
area when the preview image is magnified.
• Preview is not available if you are scanning by WSD. View the scanned images on the destination
computer instead.
• Preview is not available if a file is scanned using [Store to HDD]. You can view a stored file using
the [Preview] screen displayed from the list of stored files. For details about viewing a stored file,
see "Checking a Stored File Selected from the List", Scan.
• Preview is not available if you select [High Compression PDF] as the file type.
• Preview might not be displayed if scanning failed or the image file is corrupted. If this is the case,
scan the original again.
[Scanned Files Status] screen under the scanner function
This section explains items that are displayed and how to display the [Scanned Files Status] screen.
Use the [Scanned Files Status] screen to check e-mail transmission and Scan to Folder results.
Press [Scanned Files Status] to display the [Scanned Files Status] screen.
Up to nine transmission results are displayed at the same time. Press [ ] or [ ] to switch between results.
How to Use the Screens on the Control Panel
71
To Next Page
Loading...
