29
4. Remove the two black screws on the paper feed unit U2, and then pull out the
paper feed unit U2 until it stops.
CEZ204
5. Push the tray partially into the wide LCT.
6. Remove the black screw on the bracket.
cez180
7. Slide the bracket to the left so you can reach the rollers.
8. Remove the paper feed roller in the following order:
(1) Pick-up roller snap ring and roller
(2) Feed roller snap ring and roller
(3) Separation snap ring and roller
1
2
3
CEZ213
To Next Page
Loading...
