Detected Power
The power consumption status of the machine is measured and registered in the log while the
machine is being used.
Value Content
Controller Standby Controller standby mode
STR Suspend to RAM (STR) mode
Main Power Off The main power is turned off.
Printing Machine's printing status
Engine Standby Engine's standby status
Engine Low Engine's low-power status
Engine Night Engine's silent status
Engine Total Machine's total electricity consumption
Fusing Unit Off Fusing unit off status
Power Consumption(Wh)
Indicates the power consumption in each power state.
Specifying Log Collect Settings
Enable the collection settings for each kind of log and configure the collection level.
Job Log Collect Level
If "Job Log Collect Level" is set to [Level 1], all job logs are collected.
Access Log Collect Level
If "Access Log Collect Level" is set to [Level 1], the following items are recorded in the access log:
• HDD Format
• All Logs Deletion
• Log Setting Change
• Log Collection Item Change
If "Access Log Collect Level" is set to [Level 2], all access logs are collected.
Eco-friendly Log Collect Level
If "Eco-friendly Log Collect Level" is set to [Level 1], eco-friendly logs are not collected.
6. Managing the Machine
138
To Next Page
Loading...
