Ricoh PRO C9110 - Web Image Monitor: Network

Web Image Monitor: Network
These settings are in [Configuration] in [Device Management].
When administrator authentication is set, the restrictions to user operations differ depending on the
configuration in "Available Settings".
[IPv4]
Settings User Mach N/W File Unset Set
[IPv4] R R
R/W
*1
R
R/W
*1
R
[Host Name] R R R/W R R/W R
[DHCP] R R R/W R R/W R
[Domain Name] R R R/W R R/W R
[IPv4 Address] R R R/W R R/W R
[Subnet Mask] R R R/W R R/W R
[DDNS] R R R/W R R/W R
[WINS] R R R/W R R/W R
[Primary WINS Server] R R R/W R R/W R
[Secondary WINS Server] R R R/W R R/W R
[LLMNR] R R R/W R R/W R
[Scope ID] R R R/W R R/W R
[Details] R R R/W R R/W R
*1
You cannot disable IPv4 when using Web Image Monitor through an IPv4 connection.
[IPv6]
Settings User Mach N/W File Unset Set
[IPv6] R R
R/W
*2
R
R/W
*2
R
[Host Name] R R R/W R R/W R
Web Image Monitor: Network
213