User Code Authentication
This is an authentication method for limiting access to functions according to a user code. The same user
code can be used by multiple users.
For details about specifying user codes, see "Registering a User Code", Connecting the Machine/
System Settings.
For details about specifying the user code on the printer driver, see the driver Help.
1. Log in as the machine administrator from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next].
5. Press [User Authentication Management].
6. Select [User Code Auth.].
If you do not want to enable user authentication, select [Off].
7. In "Functions to Restrict", select the functions that you want to restrict.
The selected functions are subject to User Code authentication. User Code authentication is not
applied to the functions not selected.
For details about limiting available functions for individuals or groups, see page 50 "Limiting
Available Functions".
User Code Authentication
27
To Next Page
Loading...
