1. Log in from the control panel as an administrator with user administrator, machine
administrator, network administrator, and file administrator privileges.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] 3 times.
5. Press [Device Setting Information: Run Import (Server)].
6. Press [OK].
7. Press [Exit].
The machine restarts.
• If import or export fails, you can check the log for the error. The log is stored in the same location
as the exported device setting information file.
Troubleshooting
If an error occurs, check the log's result code first. Values other than 0 indicate that an error occurred.
The result code will appear in the circled area illustrated below.
6. Managing the Machine
156
To Next Page
Loading...
