11. Press [Yes].
12. When erasing is completed, press [Exit], and then turn off the main power.
For details about turning off the main power, see "Turning On/Off the Power", Getting Started.
• If the main power switch is turned off before "Erase All Memory" is completed, overwriting will start
over when the main power switch is turned back on.
• If an error occurs before overwriting is completed, turn off the main power. Turn it on again, and
then repeat from Step 2.
Suspending Erase All Memory
To turn off the machine's power while Erase All Memory is enabled, suspend Erase All Memory in
advance. Erase All Memory will resume when you turn on the main power.
• If [Secure Erase] or [Format] has been selected, the process cannot be suspended.
• Erase All Memory cannot be canceled.
1. Press [Suspend] while Erase All Memory is in progress.
2. Press [Yes].
Erase All Memory is suspended.
3. Turn off the main power.
For details about turning off the main power, see "Turning On/Off the Power", Getting Started.
Deleting Data on the Machine
69
To Next Page
Loading...
