Ricoh Russian-C2a - Page 177

SERVICE PROGRAM MODE 10 August, 2001
4-14
1
Mode Number/Name Function/[Setting]
4th Bottom Plate Pressure Adjustment
1Normal Size
(Optional PFU)
If a middle size threshold is not stored with SP1-911-9,
this SP adjusts the upper paper lift motor reverse time
for paper sizes larger than the small size threshold set
with SP1-911-8.
If a middle size threshold is stored with SP1-911-9,
then this SP adjusts the motor reverse time for sizes
larger than the middle size.
Do not input a value greater than 1200.
Use this SP when a paper feed problem occurs from
the 4th paper tray.
See “Optional Paper Tray Unit - Paper Lift Mechanism”
for details on SP1-911.
[0 ~ 2000 / 200 / 1 ms/step]
2 Small Size
(Optional PFU)
Adjusts the upper paper lift motor reverse time for
paper of the same size as or smaller than the small
size threshold set with SP1-911-8.
Do not input a value greater than 1200.
Use this SP when a paper feed problem occurs from
the 4th paper tray.
See “Optional Paper Tray Unit - Paper Lift Mechanism”
for details on SP1-911.
[0 ~ 2000 / 600 / 1 ms/step]
3
Middle Size
(Optional PFU)
Adjusts the upper paper lift motor reverse time for
paper sizes larger than the small size threshold set
with SP1-911-8, up to and including the middle size
threshold set with SP1-911-9. If a middle size
threshold is not stored with SP1-911-9, this SP is not
used.
Do not input a value greater than 1200.
Use this SP when a paper feed problem occurs from
the 4th paper tray.
See “Optional Paper Tray Unit - Paper Lift Mechanism”
for details on SP1-911.
[0 ~ 2000 / 200 / 1 ms/step]
4th Bottom Plate Pressure Re-adjustment
911*
4 Small Size
(Optional PFU)
Adjusts the upper paper lift motor forward rotation time
for paper of the same size as or smaller than the small
size threshold set with SP1-911-8. The motor rotates
forward when the remaining paper amount is lower
than the value of SP1-911-6.
Use this SP when a paper feed problem occurs when
paper in the 4th paper tray is running low.
See “Optional Paper Tray Unit - Paper Lift Mechanism”
for details on SP1-911.
[0 ~ 2000 / 400 / 1 ms/step]